Customer Service
Using Wet Chemistry and Spectral instruments such as ICP-MS, ICP, GCMS, FTIR,UV, Fluorescence Spectrometer, HPLC, LC-MS, Microscope, we do much more than listed below:
Acid Number and Napthenic Acids by Titration
UOP 565
Acid Number of Naval Stores Products ASTM D 465
Acid Number of Petroleum Products, Potentiometric Titration ASTM D 664
Acid Number of Petroleum Products, Semi-Micro Color Indicator Titration
ASTM D 3339
Acid Number of Used Lubricating Oils by Semi-Quantitative Micro Determination
ASTM D 5770
Acid Number, Color-Indicator Titration (TAN)
ASTM D 974.a
Acid Wash Color of Industrial Aromatic Hydrocarbons
ASTM D 848
Acidity
IEC 62021
Acidity in Aviation Turbine Fuel, Acid Number
ASTM D 3242
Acidity in Vinyl Acetate and Acetaldehyde ASTM D 2086
Acidity in Volatile Solvents and Chemical Intermediates
ASTM D 1613
Acidity of Benzene, Toluene, Xylene, Solvent Naphtha, and Industrial Aromatic Hydrocarbons
ASTM D 847
Acidity of Halogenated Organic Solvents
ASTM D 2989.a
Acidity of Hydrocarbon Liquids and their Distillation Residues
ASTM D 1093
Acidity or Alkalinity of Water
ASTM D 1067
Active Sulfur in Cutting Fluid
ASTM D 1662
Additive Elements in Lubricating Oils by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES)
ASTM D 4951.a
Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES)
ASTM D 5185
Adhesion of Solid Film Lubricants
ASTM D 2510
Aging
ASTM D 5739.c
Air and Other Non-condesables, Including Refrigerants
BB-F-1421 B.f
Alkalinity of Caustic Soda
ASTM E 291
Alkalinity of Halogenated Organic Solvents
ASTM D 2989.b
Alkalinity, Titrimetric, Phenolphthalein
Std M 2320
Alkyl Nitrate in Diesel Fuel by Spectrophotometry
ASTM D 4046
Aluminum and Silicon in Fuel by Ashing, Fusion and ICP-AES
ASTM D 5184
Antimony in Paint by AA Spectroscopy
ASTM D 3717
API Gravity of Petroleum Products, Hydrometer Method (Density, Relative Density, Specific Gravity) ASTM D 1298
Apparent Density, Bulk Factor and Pourability
ASTM D 1895
Apparent Viscosity of Engine Oils, Cold Crank Simulator
ASTM D 5293
Aromatic Carbon Content of Hydrocarbon Oil by NMR
ASTM D 5292
Arsenic and Selenium in Coal by AA/Hydride Generation
ASTM D 4606
Arsenic by AA Furnace Technique. LOD = 0.05 ppm
EPA 7060A
Arsenic in Paint
ASTM D 2348
Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry
UOP 387
Arsenic in Water
ASTM D 2972
Ash Content of Adhesives
ASTM D 5040
Ash Content of Bituminous Products.
AASHTO T111
Ash Content of Engine Coolants and Anti-Rusts
ASTM D 1119
Ash in the Analysis Sample of Coal and Coke, wt%
ASTM D 3174.a
Ash, Sulfated Residue, Lube Oils and Additives
ASTM D 874
Ash Content of Petroleum Products
ASTM D 482
API Gravity, Hydrometer Method
ASTM D 287.a
Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
ASTM D 4382
Barium, Calcium, Magnesium and Zinc in Lube Oil by Atomic Absorption
ASTM D 4628
Base Number by Potentiometric Titration
ASTM D 4739
Base Number in New and Used Lubricants by Color Indicator Titration
ASTM D 5984
Base Number, Potentiometric Perchloric Acid Titration
ASTM D 2896
Beryllium in Water
ASTM D 3645
Biodegradibilty Test, OECD, by CO2 Evolution Test, DOC Analysis Measurement
OECD 301 B
Boiling Point
BB-F-1421 B.b
Boiling Point and Boiling Point Range by GC
DuPont F3205.b
Boiling Point Distribution of Crude Oils and Vacuum Residues by Gas Chromatography
ASTM D 7169
Boiling Point Distribution of Hydrocarbon Solvents by GC ASTM D 5399
Boiling Point of Engine Coolants
ASTM D 1120
Boiling Point of Petroleum Products at Atmospheric Pressure
ASTM D 86.a
Boiling Point Range
BB-F-1421 B.g
Boiling Range Distribution of Crude Petroleum, by GC
ASTM D 5307
Bromide Ion in Water, Ground Water, and Drinking Water
ASTM D 1246
Burning Quality of Kerosene, 16 hr and 48 hr
ASTM D 187
Butadiene Dimer and Styrene in Butadiene Concentrates by GC
ASTM D 2426
Cadmium in Water
ASTM D 3557
Calcium and Magnesium in Water
ASTM D 511
Calcium, Magnesium Content
EN 14538.a
Calcium, Magnesium, Potassium, and Sodium by Flame AA Spectrometry
ASTM D 5086
Carbon and Hydrogen in the Analysis Sample of Coal and Coke
ASTM D 3178
Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M
ASTM D 3238
Carbon, Hydrogen, and Nitrogen in Petroleum Products, Instrumental
ASTM D 5291.a
Chloride in Aqueous Sample
EPA 9212
Chloride in Coal
ASTM D 2361
Chloride in Refinery Waters
UOP 456
Chloride in Refrigerants
BB-F-1421 B.e
Chloride Ion in Engine Coolants
ASTM D 3634
Chloride Ions by Ion Chromatography
ASTM D 5542.a
Chloride Ions in Brackish Water, Seawater & Brine
ASTM D 4458
Chromium in Paint by AA Spectroscopy
ASTM D 3718
Chromium, Hexavalent, Dissolved (AA, Furnace)
EPA 218.5
Cobalt in Water
ASTM D 3558
Color, Visual
ASTM E 1478
Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D 3414
Copper Content by Atomic Absorption or GFA
AASTM D 1688
Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 6732
Corrosive Sulfur in Electrical Insulating Oil
ASTM D 1275
Corrosive Sulfur in Electrical Insulating Oil – Part A
ASTM D 1275.a
Corrosive Sulfur in Electrical Insulating Oil – Part B (48 hrs)
ASTM D 1275.b
Corrosivity, pH by Glass Electrode
EPA 9045C
Elemental Analysis Coal and Coke Ash by AA
ASTM D 3682
Elemental Analysis of Lubricants and Additives per element ASTM D 4927
Extraction Procedure, Zero–Head Space, Purgables
EPA 3810
Flame Atomic Absorption Spectro (Consolidate FLAA). LOD = 0.05 ppm, per element
EPA 7000B
Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM E 681
Flash Point
DIN 51 755
Flash Point and Fire Point, Cleveland Open Cup
ASTM D 92.c
Flash Point by Small Scale Closed Cup Tester, (Ramp Method)
ASTM D 7236
Flash Point of Liquids by Small Scale Closed Cup Apparatus (Seta–Flash)
ASTM D 3278
Flash Point, Cleveland Open Cup
ASTM D 92.a
Flash Point, Continuous, by Closed Cup
ASTM D 6450
Flash Point, Small Scale Closed Tester, Seta–Flash, 32 to 230ºF Range
ASTM D 3828
Flash Point, Tag Closed Tester
ASTM D 56
Flash Point, Tag Open Cup
ASTM D 1310
Flash Point, Tag Open Cup, Cutback Asphalt
ASTM D 3143
Fluoride Content, Ion Selective Electrode
EPA 340.2
Fluoride Ion in Water
ASTM D 1179
Fluoride Ions in Brackish Water, Seawater, and Brines
ASTM D 3868
Fluorine, Total, in Coal by Oxygen Bomb Combustion
ASTM D 3761
Foam in Aqueous Media, Blender Test
ASTM D 3519
Hardness in Water
ASTM D 1126
Infrared Spectrochemistry; Fuel Soot, Oxidation, Nitration
TOL 5047.b
Infrared Spectrochemistry; Full Spectrum FT–IR
TOL 5047.a
Inorganics by ICP – Atomic Emission Spectroscopy, per element
EPA 6010B
Iron in Trace Quantities
ASTM E 394
Lead by Inductively Coupled Plasma – Atomic Emission Spectrometry
ASTM E 1613.b
Lead Content, Atomic Absorption Graphite Furnace
EPA 7421
Lead in Gasoline by Iodine Monochloride Method
ASTM D 3341
Lead in Water
ASTM D 3559
Limestone Content
TEX 406–A
Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D 3340
Manganese in Gasoline by AA Spectrometry
ASTM D 3831
Maximum Size of Particulates in Gas, um
TOL SC 6028.b
Melting Point of Petroleum Wax
ASTM D 87
Melting Point of Petroleum Wax and Petroleum, Drop Melting Point
ASTM D 127
Mercury by Cold Vapor Atomic Absorption, Limit of Detection. LOD = 0.05 ppm
EPA 7040A
Mercury by Cold Vapor Atomic Absorption, LOD = 0.05 ppm
EPA 245.1
Mercury, by Cold Vapor Atomic Absorption, Liquid Waste
EPA 7470A
Mercury, by Cold Vapor Atomic Absorption, Solid Waste
EPA 7471A
Mercury, Total, in Coal by Acid Extraction/Cold Vapor AA
ASTM D 6414
Mercury, Total, in Coal by Direct Combustion Analysis
ASTM D 6722
Mercury, Total, in Coal by Oxygen Bomb Combustion
ASTM D 3684
Mercury, Total, in Water
ASTM D 3223
Metals Analysis, Examination of Water and Wastewater
Std M 3110
Metals and Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 6728
Metals by Atomic Absorption (AA). LOD = 0.05 ppm, per elementEPA 7000AMetals by Graphite Furnace Atomic Absorption Spectroscopy, GFAA. Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm
ASTM E 1184
Metals by ICP–AES, Semi–Quantitative Scan, 27 metals
ASTM E 1613.a
Metals by Inductively Coupled Plasma – Atomic Emission Spectroscopy (ICP–AES), on Soils, Sludge, Solids, and Petroleum Products. Includes: Arsenic, Cadmium, Chromium, and Lead. Limit of Detection. LOD = 1 ppm
EPA 6010B.1
Metals Content
EN 14538
Metals in Compounding Materials, Flame AA, per element
ASTM D 4075
Metals in Drinking Water Surface Waters or Industrial Wastewater, by ICP–AES
ASTM D 1976
Metals in Gas Oils by AAS; V, Fe, Pb, Cu, Na
UOP 848
Metals in Lubricating Greases by ICP–AES
ASTM D 7303
Metals in Petroleum Coke by Inductively Coupled Plasma Atomic – Emission Spectrometry (ICP–AES)
ASTM D 5600
Metals in Refuse–Derived Fuel by Atomic Absorption Spectroscopy
ASTM E 885
Metals in Water by Inductively Coupled Plasma – Mass Spectrometry, per element
EPA 6020
Moisture, Dry Basis, Calculated from As–Determined Basis
ASTM D 3180.a
Molecular Mass of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D 2503
Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High–Performance Size–Exclusion Chromatography
ASTM D 5296
Molecular Weight from Viscosity Measurements
ASTM D 2502
Molybdenum in Water
ASTM D 3372
Monomethyl Ether of Hydroquinone (MEHQ) in Acrylate Esters and Acrylic Acid
ASTM D 3125
MTBE, ETBE, TAME, DIPE, tertiary–Amyl Alcohol and C1 to C4 in Gasoline by GC
ASTM D 4815
Naphthalene Content in Aviation Turbine Fuels
ASTM D 1840
Nickel and Vanadium in FCC Equilibrium Catalysts by Acid Decomposition and Atomic
ASTM D 1977
Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP–AES)
ASTM D 5708
Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels
ASTM D 5863
NitrateEPA 9200Nitrate and Nitrite, Colorimetric
EPA 353.4
Nitrite–Nitrate in Water
ASTM D 3867
Nitrogen Content by Ion Chromatography
UOP 939
Nitrogen in Petroleum and Petroleum Products
ASTM D 5762
Nitrogen in the Analysis Sample of Coal and Coke
ASTM D 3179
Nitrogen, (Ammonia), Colorimetric
EPA 350.1
Nitrogen, Organically Bound, by Chemiluminescence
ASTM D 4629
Organic Compounds in Water by Gas Chromatography and Mass Spectrometry (GC–MS)
ASTM D 4128
Organic Compounds, Purgables, by GC–MS
EPA 624
Oxidation Stability of Used Lubricants by FT–IR
ASTM D 7214
pH Measurement of Water of Low Conductivity
ASTM D 5464
pH of Aqueous Solutions with Glass Electrode
ASTM E 70
pH of Engine Coolants, Antifreezes and Anti–Rusts
ASTM D 1287
pH of Soils
ASTM D 4972
pH of Solid Wastes, Electrometric Measurement
EPA 9040B
pH of Waste by Screening Test
ASTM D 4980
pH of Water
ASTM D 1293
pH of Water Extractions of Halogenated Organic Solvents
ASTM D 2110
pHe of Ethanol, Denatured Ethanol and Fuel Ethanol
ASTM D 6423
Selenium in Water
ASTM D 3866
Silver in Water
ASTM D 3944
Solidification Point of Petroleum Wax
ASTM D 3948
Separometer Index, Water Separation Characteristics, Micro (WSIM or MSEP)
ASTM D 4045
Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 4056
Sulfur Compounds in Natural Gas and Gaseous Fuels by GC
ASTM D 5623
Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection
ASTM D 5709
Strontium–90 in Water, by ICP–MS
ASTM D 5830
Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D 6071
Sulfur in Gasoline by Wavelength Dispersive X–Ray Fluorescence
ASTM D 6428
Sulfur, Total, in Light Hydrocarbons, Oxidative Combustion Method
ASTM D 6445
Carbon in Water
ASTM D 4839
Total and Organic Carbon in Water by Hi–Temp Oxidation, Coulometric Detection
ASTM D 4129
Total Carbon by CHN Analyzer
ASTM D 5291.b
Total Chemical Bound Nitrogen in Water by Pyrolysis
ASTM D 5176
Total Chlorides
EPA 9253
Total Chlorine in Coal by Oxygen Bomb Combustion, Ion Selective Electrode
ASTM D 4208
Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D 6316
Total Dissolved Solids, TDS
Std M 2540C
Total Sediment by Hot Filtration, Procedure A
ASTM D 4870.a
Total Sediment by Hot Filtration, Procedure B
ASTM D 4870.b
Total Sediment in Residual Fuels
ASTM D 4870
Total Solids, TS
Std M 2540B
Total Sulfur In Fuel Gases
ASTM D 1072
Trace Element in Hazardous Waste Fuel, per element
ASTM D 5839
Trace Elements by Inductively Coupled Plasma in Water and Waste (ICP–AES), per element
EPA 200.7 CL
Trace Elements by Inductively Coupled Plasma, (ICP–AES), per element
EPA 200.7
Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D 3683.b
Trace Elements in Coal and Coke Ash by Atomic Absorption: Beryllium, Chromium, Copper, Manganese, Nickel, Lead, Vanadium, and Zinc, per element
ASTM D 3683.a
Trace Elements in Coal, Coke, and Combustion Residues by ICP–AES, ICP–MS, and GFAA
ASTM D 6357
Trace Elements in Middle Distillate Fuels by ICP–AES
ASTM D 7111
Trace Elements in Waste Streams, by ICP–AES, per element
ASTM C 1111
Trace Elements in Water by Flame Atomic Absorption Spectrophotometry, 14 elements. LOD = 0.5 ppm
ASTM D 4691
Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, and Calcium. LOD = 0.01 ppm
ASTM D 3919.c
Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry (GFAA). Includes: Sodium, Potassium, Calcium, Iron, and Copper. LOD = 0.01 ppm
ASTM D 3919.d
Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrometry, (GFAA). Includes: Sodium and Potassium. LOD = 0.01 ppm
ASTM D 3919.b
Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry, per Element
ASTM D 3919.a
Trace Elements in Water by Inductively Coupled Plasma – Mass Spectrometry (ICP–MS), per element
ASTM D 4291
Trace Metals by ICP–MS Includes: Vanadium, Sodium, Potassium, Lithium, Lead, and Calcium. LOD = 0.01 ppm
ASTM D 5673.b
Trace Metals in Oils by Wet Ashing and ICP–AES
UOP 389
Trace Metals in Petroleum Coke by Atomic Absorption, per element
ASTM D 5056
Ultimate Analysis (C, H, N, S, O) for Coke and Coal (See test package for coal and coke).
ASTM D 3176